hewlett packard enterprise HPE Aruba 4100i Switch 12G 8 Port Class 4 PoE and 4 Port Class 6 PoE 2 SFP+ Layer 2 Web GUI CLI NetEdit REST APIs

Aruba 4100i 12-port 1GbE (8-port Class 4 POE and 4-port Class 6 POE) 2-port SFP+ DIN Mount Switch (JL817A) Description 4x ports 100M/1G BaseT Class 6 PoE ports supporting up to 60W per port 8x ports 100M/1G BaseT Class 4 PoE ports supporting up to 30W per port 2x 1/10G SFP ports Supports PoE Standards IEEE 802.3af, 802.3at and 802.3bt (up to 60W) 1x USB-C Console Port 1x RJ Console 1x USB Type A Host port 1x Alarm socket 2x DC power socket Power Supplies Field replaceable Industrial DIN Rail Power Supplies Supported PSUs: JL819A, JL820A and JL821A Supported 2 PSU with redundancy, non sharing See external PSU specification table for available PoE power Fans Fanless Physical Characteristics Dimensions (H) 160 mm x (W) 113 mm x (D) 162.9 mm (173.5 mm w/DIN Rail Bracket) [6.3" x 4.4" x 6.4"(6.8" w/DIN Rail Bracket)] Weight 3.84 kg (8.46 lbs) Mounting And Enclosure Cable management kit included. 2-post rack mounting kit included. 4-post rack mounting kit available separately Additional Specifications CPU Dual Core ARM Cortex A9 @ 1016 Mhz Memory And Flash 4 GB DDR3 32 GB eMMC Packet Buffer 12.38MB (4.5MB Ingress/7.875MB Egress) Performance Model Switching Capacity up to 64 Gbps Model Throughput Capacity up to 46 Mpps Average Latency (LIFO-64-bytes packets) 1 Gbps: 2.390µSec , 10 Gbps: 2.038µSec Switched Virtual Interfaces (dual stack) 1G: 5.32 µSec 10G: 1.48 µSec 25G: 2.78 µSec 40G: 1.31 µSec 100G: 1.42 µSec IPv4 host table (ARP) 756 IPv6 host table (ND) 576 IPv4 unicast routes 576 IPv6 unicast routes 576 MAC Table Size 8192 IGMP Groups 512 MLD groups 512 IPv4/IPv6/MAC ACL entries (ingress) 256 / 128 / 256 Environment Operating temperature -40°C to 60°C, 0m/s (-40°F to 140°F, 0 LFM) -40°C to 70°C, 0.2m/s (-40°F to 158°F, 40 LFM) -34°C to 75°C, 1m/s (-29.2°F to 167°F, 200 LFM) Non-Operating Storage relative humidity 5% to 95%, non-condensing Max Operating Altitude up to 4.2 km (13800 ft) Max Max non-operating Altitude 4.6 km (15000 ft) Max Electrical Characteristics Frequency N/A AC voltage Refer to the PSU specification table DC Input Voltage 54V (switch input voltage, provided by JL819A, JL820A, JL821A) Current JL820A- max 8A (360W PoE) JL819A, JL821A- max 4.4A (180W PoE) Maximum heat dissipation BTU/hr With JL819A PSU: 89 BTU/hr at 230V - Room temperature (25°C) With JL820A PSU: 95 BTU/hr at 230V - Room temperature (25°C) With JL821A PSU: 94 BTU/hr at 48V - Room temperature (25°C) Power Consumption (JL819A, JL820A- 230VAC) (JL821A- 48VDC) With JL819A PSU: Idle: 22W 100% Traffic Rate: 26W 100% Traffic Rate (w/ heater): 55W With JL820A PSU: Idle: 24W 100% Traffic Rate: 28W 100% Traffic Rate (w/ heater): 57W With JL821A PSU: Idle: 22W 100% Traffic Rate: 27W 100% Traffic Rate (w/ heater): 56W *Heater will only turn on at extreme low temperature condition Safety Europe: EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 EN 62368-1, Ed.2:2014 North America: UL 62368-1, 2nd Edition CAN/CSA C22.2 No. 62368-1-14 Worldwide: IEC 60950-1:2005 Ed.2 + Am 1:2009 + A2:2013 IEC 62368-1:2014 EN/IEC 60825-1:2014 Class 1 UL/IEC 61010-2-201 GB 4943.1:2011 CNS 14336-1 K 60950-1 EMC Europe: EN 55011:2010/CISPR 11, Class A EN 55032:2015/CISPR 32, Class A EN 55035:2017/CISPR 35 EN 61000-3-2:2014, Class A EN 61000-3-3:2013 US: FCC CFR 47 Part 15: 2018 Class A Canada: ICES-003 Class A Japan: VCCI Class A Taiwan (BSMI) CNS 13438 Class A Korea KN 35:2015 Korea KN 32 Class A Aus/NZ AS/NZS CISPR 32 Class A Worldwide: VCCI Class A CISPR 11 Class A CISPR 22 Class A Lasers EN 60825-1:2007 / IEC 60825-1:2007 Class 1 Class 1 Laser Products / Laser Klasse 1 (Applicable for accessories - Optical Transceivers only Industry Specific Compliance Industrial EN 61000-6-2 Industrial Immunity EN 61000-6-4 Industrial Emissions EN 61000-6-1 Light Industrial Immunity Power Substation IEEE 1613 Electric Power Stations Communications Networking EN/IEC 61850-3 Electric Substations Communications Networking Railway Application EN 50121-3-2 Railway - Apparatus for Rolling Stock EN 50121-4 Railway - Signaling and Telecommunications Apparatus EN 50155/IEC 60571 - Railway applications, Rolling stock, Electronic equipment Traffic Control System NEMA TS 2-2016 Protection Standard EN 60529 IP30 Immunity Generic EN 55035, CISPR 35, KN35 EN EN 55035, CISPR 35 ESD EN 61000-4-2 (air - 15kV, contact - 8kV) Radiated EN 61000-4-3 (10V/m UTP, 20V/m STP) EFT/Burst EN 61000-4-4 4kV (1kV UTP, 4kV STP) using: JL819A, JL820A with SPD2-300-2P0-R surge protector JL821A with SPD2-150-2P0-R surge protector needed. Without surge protector and STP: JL819A or JL820A PSU: 2kV JL821A PSU: 1kV Surge EN 61000-4-5 2kV/4kV(UTP) using: JL819A, JL820A with SPD2-300-2P0-R surge protector JL821A with SPD2-150-2P0-R surge protector Without surge protector: JL819A or JL820A PSU: 1kV/2kV JL821A PSU: N/A Conducted EN 61000-4-6 (3Vrms UTP, 10Vrms STP) Power Frequency Magnetic Field EN 61000-4-8 (100A/m 1min,1000A/m 1sec) Damped Oscillatory Magnetic Field EN 61000-4-10 (100A/m) Conducted CM Disturbances EN 61000-4-16 (30V, Cont/300V, 1 sec) Ripple Immunity DC Power EN 61000-4-17 (10%) Damped Oscillatory Wave EN 61000-4-18 (2.5kV, 1MHz) Voltage Dips and interruptions EN 61000-4-29; EN 61000-4-11 (Level 3) Harmonics EN 61000-3-2, IEC 61000-3-2 Flicker EN 61000-3-3, IEC 61000-3-3 Dynamics Vibration IEC 60068-2-6 & 64 (operation & nonoperation) Shock IEC 60068-2-27 (Operational Shock, 30G, 18ms, Half-Sine) IEC 60068-2-27 (Non-operational Shock, 50G, 11ms, Trapezoidal) IEC 60068-2-31 (Non-operational Free Fall, 100mm) IEC 60068-2-31 (Non-operational Topple) Railway Application Compliance to EN 50155 (mounting) & IEC 61373 Mounting and Enclosure Mounts to JL822A (3U DIN-to-Rack Bracket, puchased separately) which allows the switch to be mounted in an EIA/TIA standard 19" telco rack. Switch can be directly installed on a DIN rail mounted to a suitable surface to withstand the weight of the switch and power supplies. DIN rail mounting (included). Can be mounted in 90-degree manner to present the cables exiting the side of the switch - see installation guide for details. Wire Power Input AWG 14 up to 2m Alarm connector AWG 18-16 PoE Budget User configurable PoE budget - If 2 external power supply units are used concurrently, please set according to PSU with lower PoE capacity. JL819A Below ambient 50°C: 180W At ambient 60°C: 140W At ambient 70°C: 80W JL820A Below ambient 50°C: 360W At ambient 60°C: 320W At ambient 70°C: 200W JL821A With PSU input = 48V-55V DC Below ambient 50°C: 180W At ambient 60°C and 70°C: 150W With PSU input = 24V DC Below ambient 70°C: 150W With PSU input = 12V DC Below ambient 60°C: 60W At ambient 70°C: 50W Does not support PSU Power Sharing. Refer to Installation & Getting Started Guide for the PoE budget setup.